100 Best Companies to Work

Hi

http://money.cnn.com/magazines/fortune/bestcompanies/2010/full_list/

Nothing to say

Well. Yes. My company is not here ;-( . ;-)

sAntos

Windows Embedded. ewfmgr error. EWF error

hi

The windows Embedded XP or Standard.

Have you ghosted a Windows Embedded?

Did you had problems with the EWF program?

I followed this link

http://www.magicjacksupport.com/hp-thin-client-and-magic-jack-t685-420.html

Resume:

Go to a command prompt and type the following

rundll32 ewfdll.dll,ConfigureEwf and press Enter. You must type it exactly as I listed it as it is case sensitive.

Then type

ewfmgr c: -enable and then reboot and see if that fixes it.

 

aTTENTION:

I did it. The first time I didn’t got a good result. The EWF program did work.

I did it twice. And When I rebooted, The think client works properly.

sAnTos

Hyper-V R2, BSDO, evbda.sys error. CPU C-States

Hi

We have some HP Blade bl460c G6 and We have problems with some random reset.

The dump file speaks about evda.sys file.

The HP company want to update the firmware and NIC drivers. We did it. But we have the problem again.

A colleague got this links: (Thank you Marta Marco)

http://www.minasi.com/forum/post.asp?method=ReplyQuote&REPLY_ID=157302&TOPIC_ID=32281&FORUM_ID=51

http://boardreader.com/thread/R2_Hyper_V_HP_hardware_6ihulXowp.html

The first link speaks about this R2 update: (but Microsoft dont recommend to install it in a production environment).

http://support.microsoft.com/kb/974598/en-us

So, Now, We did about C-States. We switch off the option.

And We changed to high performance the power options in the panel control as well

is that right? We hope so

sanTos

RiverBed, SteelHead. To Accelerate files.

Hi
I was testing this appliance

Thank you to Riberbed, Antea and the Engineer (Roberto).

I would like to accelerate video files.

This is the main screen.



sAnTos

Hyper-V Security Guide

hi

I downloaded it

http://www.microsoft.com/downloads/details.aspx?FamilyID=2220624b-a562-4e79-aa69-a7b3dffdd090&displaylang=en




sAnTos

Hyper-V R2 reboot blade. No logs

hi
We have 4 HP blades BL460 G6.

We installed Windows Server 2008 R2 and Hyper-V for VDI with Citrix XenDesktop.
The server restart by random.
No logs in Blade Chassis.
There is a dump file.
We studied the dump file and we sent it to HP.
The HP company advise us about to change some firmware and drivers about NICS.
I am not sure about the solution.

This picture is the NIC update:


saNtos

Infrastructure Architect

hi

There don’t seem to be any formal definition of what Infrastructure architecture is, the only one found by searching the web is from the Open Group where it is defined as:

Infrastructure architecture connotes the architecture of the low level hardware, networks, and system software (sometimes called "middleware") that supports the applications software and business systems of an enterprise.

The main thrust of this definition is to position Infrastructure Architecture relative to TOGAF and ends up as calling infrastructure architecture everything other than specific software project architectures which whilst not incorrect is a rather exclusive definition.
It would appear that there is not a formal definition of Infrastructure Architecture for IT so I have come up with my own:
Infrastructure Architecture is the set of abstractions used to model the set of basic computing elements which are common across an organization and the relationships between those elements.
So it would include the architecture of:
• Networks
• Storage
• Platforms
o Middleware
• Information
• Access Management
o Security
o Identity
• Management
o Deployment
o Provisioning

It does not include anything to do with design or operational processes or software design, these fall under the remit of SDLC, Operations Lifecycle and Software Architecture respectively. It does not include any business elements.It is a major subset of Enterprise Architecture and the platform for a Service Oriented Architecture. It does include Service Oriented Infrastructure and Grid.



The best post to explain it:

http://blogs.technet.com/michael_platt/archive/2005/08/16/409278.aspx

sAnTos

Merry Xmas

Hi

A colleague sent me this picture from a Spanish company.

It is a xmas card from the WARP spanihs company. (IT company).
http://warp.es/

Thanks Nacho for sending me the xmas card, ;-) ;-)

Note: The formula is the greetings card.

WmiPrvSE memory leak. The computer 'localhost' failed to perform the requested operation because it is out of memory or disk space

Hi

The computer 'localhost' failed to perform the requested operation because it is out of memory or disk space.




I got these error.
The disk had 75 % free space.
So, the memory is the problem
I killed the WmiPrvSE. The processes had 700.000k.
After, I killed it, everything goes well and the processe started again with 6.000k.
The hyper-v manager started to work without problem.

You can solve the problem restarting the server of course. But the server was in a enviroment production.





sAnTos

Connecting to Virtual Machine Management service

Hi

Have you read the post before?

The solution is the same.

I remove some files from the disk with 11G free. We have 25G free. We restarted the server, and everything goes well.

sAnTos

The computer 'localhost' failed to perform the requested operation because it is out of memory or disk spac

Hi

Yes, We had a problem in a disk.
We had 11G, but Hyper-V manager shut down. The VM runned well.



We changed some vm to another disk, we restarted the host server and everything is ok now.

NOTE:

See WmiPrvSE entry. It is a better solution.
Close this service and It is solve de problem

sAnTos

Virtual Machine connection off.

hi

We have hyper-V R2.

I had a problem with the blade host server.

When We started the host server some machines waiting for starting.

I couldnt turn off. The virtual machine connection is off. See the picture`

Although we restarted the server and everything gone well.

My colleague Marta Marco found the problem in this log: (thanks Marta ;-) )

http://myitforum.com/cs2/blogs/rdixon/archive/2008/12/20/virtual-machines-found-stuck-with-status-quot-starting-quot-in-hyper-v-workaround.aspx

The vmwp.exe service looks the problem.

sanTos

Windows 7 USB/DVD Download Tool

hi

are you looking for tools to put Windows 7 in a USB Stick?

Dont waste your time!!!

http://store.microsoft.com/Help/ISO-Tool

yes, the online microsoft store. But it is a free tool

sAnTos

550 5.7.1 Unable to relay for . Exchange 2010

Hi

If you solve the previous post, you will have this other problem.
So , look at this link
http://community.bartdesmet.net/blogs/bart/archive/2004/10/19/444.aspx

In my Exchange, I have 2 domains.
The second wasnt in Accept Domains tab.

I put it, and everything was well.

santos

530 5.7.1 Client was not authenticated. Exchange 2010

Hi

My server is in Spanish, so it would be better to visit this link:

http://smtp25.blogspot.com/2009/04/530-571-client-was-not-authenticated.html

And you solve the problem

sAnTos

RDS. Application and User Permission

Hi
With RDS, you can add permision for the users.
With W2k8 you havent the tab "User assignment", but There is one .dll file in The internet that you can solve the problem.
Now with the W2k8 R2 is a piece of cake.



sAnTos

Remote Desktop Services. To Publish IE 8 is difficult.

Hi
We have RDS with REmoteApp Manager and REmote Desktops SErvices Manager.


I publish Adobe REader 9, Firefox 3.5, Calc and everything goes well

But I try to publish IE8 and the icon is wrong
And I need to change the path from file://server/program files\ .. to c:\program files\....

sAnTos

Client Access error. Exchange 2010. Net.Tcp error

Hi

Windows Server 2008 R2 and Exchange 2010 Client Access error.

The error:
Net.Tcp Port Sharing Service needs to put in Automatic.


REad the link: (Windows Server 2008 R2 operating system prerequisites )
http://technet.microsoft.com/en-us/library/bb691354.aspx

The 4 point is the solution:

After the system has restarted, log on as an administrator, open an elevated Windows PowerShell console, and configure the Net.Tcp Port Sharing Service for Automatic startup by running the following command:

Copy Code
Set-Service NetTcpPortSharing -StartupType Automatic

Santos

Windows 7 keyboard shortcuts – the complete list

Hi


How many people knows the keyboard shorcuts?

http://4sysops.com/archives/windows-7-keyboard-shortcuts-the-complete-list/#New Windows 7 hotkeys

My top :


Windows logo key +Space
All windows become transparent so you can see through to the desktop


Windows logo key +(+/-)
Zoom in/out
(it is a pitty that you can draw something like ZoomIt (Sysinternals) ).
http://technet.microsoft.com/en-us/sysinternals/bb897434.aspx


Windows logo key +Shift+Left/Right arrows
If you’ve got dual monitors, this will move the active window to the adjacent monitor
(I have 2 monitors). I use Ultramonitor. It is a great tool.
http://www.realtimesoft.com/ultramon/


sAnTos

PowerShell and PowerGUI

hi

I looking to some tools to Powershell to use with Hyper-V

This tool is free:
http://powergui.org/index.jspa

Many PowerPacks for Hyper-V, AD and so on.


Great Tool

sAnTos